HP A-WA2x00 Access Point Series

Variety of dual-band access points that handle up to 64 users per radio, with a choice of single or dual radios, internal or external antennas, and 802.11a/b/g/n operation. These access points are used with a WLAN controller, and some models are rated for extreme conditions of heat.

HP A7700 Access Point Series
Cost-effective dual band, PoE wireless solution for small and medium enterprises, configurable for IEEE 802.11a or for use as an IEEE 802.11b/g access point. Wi-Fi Certified and secured by WEP and WPA/WPA2, this AP provides ultra-fast speeds of up to 108 Mbps in turbo mode, and offers superior longrange connectivity with eXtended range (XR) technology.

HP A8700 Access Point Series
Innovative, cost-effective dual-radio access points. Powered by a single standard IEEE 802.3af PoE connection, this access point features preset defaults for easy setup, as well as advanced MIMO technology, WPA2 security, and IEEE 802.1X authentication over the wireless LAN.

 

HP A9100 Access Point Series
Standalone fat access point with one radio running at 2.4 or 5 GHz, allowing it to support 2.4-GHz 802.11b/g/n or 5-GHz 802.11a/n wireless connections. Management via Web interface, CLI/Telnet interface, HP IMC, or any SNMP management station. IEEE 802.3af power.
 
HP A9500 Access Point Series
Standalone fat access point with two radios running at 2.4 or 5 GHz, allowing it to support simultaneous 2.4-GHz 802.11b/g/n and 5-GHz 802.11a/n wireless connections. Management via Web interface, CLI/Telnet interface, HP IMC, or any SNMP management station. IEEE 802.3af power.

HP Networking 802.11n MultiService Access Point Series
Full-n-speed access points with legacy a/b/g support; completely support IEEE 802.3af PoE with full 3X3 MIMO. 

HP Networking MultiService Access Device Series
Wired and wireless connectivity in a small unit that can be quickly and discreetly installed in a standard wall outlet box. Device has four Ethernet ports, a 2.4 GHz wireless access point, and a pass-through RJ-45 connection.

• Single radio
• IEEE 802.11b/g
• Self-healing, self-optimizing local mesh
• Two internal antennas
• 4 10/100 managed Ethernet ports

 

HP Networking 802.11a/b/g MultiService Access Point Series
Deliver scalable, seamless wireless access indoors and out, enforcing QoS and security policies right at the network edge. Outdoor APs are enclosed in die-cast aluminum casing; compliant with IP65 and EN61373.

• Single, dual and tri radio
• Intelligent traffic forwarding, Built-in security
• Self-healing, Advanced mesh capabilities
• Client Access
• Indoor and Outdoor enclosures

 

HP Networking Mobility Integrated Services Access Point Series
Integrated, full-featured MultiService Mobility Access Point and MultiService Mobility Controller in a single turnkey unit.

• Hotspot in a box
• Zero-configuration service interface
• Advanced bandwidth management capabilities
• Complete IP routing and networking services
• Integrated IEEE 802.11a/b/g MSM Access Point

 

HP Networking M110 Access Point
Entry-level device that can be configured to operate as an access point or a wireless distribution system (WDS) bridge. Works in autonomous mode only.

• Enterprise scalability and redundancy
• Optimized architecture for flexible network design
• IEEE 802.11a/b/g/n AP and access device support
• Rock-solid WLAN security
• Blade mobility controller

 

HP V110 Wireless-N Router Series
Cable/DSL routers providing robust routing and security features that allow wired and wireless users to share a single broadband connection for a small business.

HP Networking Wireless Access Point 10ag
Access points that provide secure, reliable 802.11a and 802.11b/g wireless connectivity for small business networks.

• Wireless AP with IEEE 802.11a/b/g support
• Powerable by PoE or AC
• Secure connectivity, dual radio, up to eight SSIDs
• Industry-leading warranty